search_all
Home Tech - Soundproofing Basics of Soundproofing
Basics of Soundproofing

This is an introductory article looking at the basic purpose and types of sound insulation that are available to anyone seeking to soundproof a space.

SoundproofingYou will find that although the principles are straightforward, the actual implementation can get pretty technical pretty quickly.

There are lots of resources on Drumdojo but if you seek clarification on some issue or if you can offer to add to the useful information, please visit us on the Drumdojo forums - Sensei

 How Sound Insulations Work
by: Clinton Maxwell

Sound insulations are insulating materials that work to reduce the noise that enters a room from outside the home or from other rooms. These materials can be installed during construction, or later as a home improvement project. Products that are blown, such as foams, are easier to install in existing homes.

You can repair insufficiently insulated areas yourself, or hire a professional to do the job for you. Installing most of these materials is a fairly easy DIY project for the skilled homeowner. Some home improvement stores offer weekend workshops to show you how.

How Sound Insulations Work

Sound is transmitted when vibrations move through the air, floors, ceilings and walls. The sound waves move from one room to the other, or from the outside of the home to inside. This includes traffic noise or the sound of noisy neighbors. Insulation is a good sound absorber and is effective at minimizing the noises entering a room.

Soundproofing consists of using a barrier of some sort to prevent sound from entering the space that has been sound proofed. There are two basic ways to achieve this reduction in sound: noise absorption and noise reduction.

Approaches to Sound Insulations

There are a few approaches to noise level reduction or noise absorption. A variety of materials can be used for either purpose. Noise reduction can be accomplished with the use of space between rooms. The more space, the more room for sound waves to dissipate. If you increase the distance between the source of the noise and the space, you will reduce the noise that enters the space.

The other method, noise absorption, is also referred to as dampening. With this method, the sound waves are converted to heat within the insulation. This increases energy efficiency, while reducing sound. It also suppresses the echoes and reverberation of sound waves.

Materials for Sound Insulations

Rock Wool Insulation is made of all natural materials, such as diabase or basalt. It is used for insulating the home and absorbing sound. There are other benefits to this type of insulation. It is fire resistant and helps control condensation. In addition, it is resistant to the growth of bacteria, mold and mildew.

Mineral Wool Insulation is available in either batts or loose fill. The material is stiff and brittle. Mineral wool is not only sound proof, but is fire resistant as well.

Fiberboard Insulation is installed under the drywall in your home. This material reduces sound waves through the walls and ceilings. It is effective for reducing outdoor noise from entering your room. This material is an excellent choice if you live in a city or for homes located on a busy street.

Acoustical Wall Coverings can be attached directly to the drywall. The best material to use in these wall coverings is polyester. This material is best at absorbing the sound waves that you are trying to eliminate.

Cork Squares look like floor tiles, but are made with cork board. The cork has a self sticking backing that is easy to apply to the wall surface. If you like the look of the cork, you can leave it this way. However, if you want it to match the decoration in your house, you can cover the cork with wallpaper.

About The Author


Clinton Maxwell distributed a lot of articles for the http://www.soundproofing-tips.com internetsite. The author is publishing about sound insulations ( http://www.soundproofing-tips.com/sound-insulations.html ) and other areas in this field.



Paul Marshall -

Paul is the owner of Drumdojo and the Dojo Sites, He is responsible for writing and collating a lot of of the material that you see here on drumdojo.

Playing drumset since age 5, Paul has been a drummer on and off for most of his life. He plays every drum he can get his hands on. Paul works as an instrument designer, has designed many instruments for the Stomp orchestra and more recently in Holywood Movies. Paul is a prolific web designer and currently has a portfolio of around 40 business and hobby sites.


Related Articles:


Articles by this Author:

Djembe SkinDjembe Skin
Djembes are traditionally fitted with the skin of a goat.  There are a number of options and factors to be considered when purchasing a skin for your djembe. Size. The majority of...
Read More >>
Helmholtz Resonators
or... Where does all that bass come from??? Taken from a posting on the Yahoo Goblet Drumming group and therefore refers to the darbouka and tonbak drums but can also be applied to Djembes and...
Read More >>
cheap drum setscheap drum sets
"If thine neighbour offend thee....buy each of his children a drum"-Proverb Caveat Papa Ok so we can all identify this one as a toy, right?   Please let a drummer set the drums up for the photograph...
Read More >>
About Frame DrumsAbout Frame Drums
Frame Drums Paul Marshall Introduction Framedrums are perhaps one of the earliest forms of drum made by many civilizations across the world, in essence they are a piece of animal skin stretched over...
Read More >>
logo footer   Designed by Marshallarts (c)1999-2010 - All Rights Reserved