search_all
Home Soundproof Garage - Garage Conversion Stage 2 Soundproof a Room Stage 2 Part 4
Soundproof a Room Stage 2 Part 4

rockwool slab insulation soundproof drummer studioThe type of insulation used was slabs of 75mm Rockwool RWA45 (45 kgm-3).

These were fixed to the wall by using short lengths of metal strapping to act as washers. These were placed onto 100mm screws with a Rawlplug on the end. The Rockwool slab was then offered up to the wall, a hole drilled through it into the garage wall, and then the screw with the strapping washer pushed through the Rockwool into the hole and screwed into place.

Each Rockwool slab was held in place with four screws.

rockwool slab insulation soundproof drummer studio

Applying the insulation to the outer walls

The existing windows were covered overrockwool slab insulation soundproof drummer studio






Articles by this Author:

Soundproof a Room Stage 4 Part 4Soundproof a Room Stage 4 Part 4
Construction of the outer wall was actually last stage to be completed, but I'll put it in here because it fits at this point. The outer wall completed with the doors hung and an access hatch to the...
Read More >>
Soundproof a Room Stage 1 Part 6
Reverberation Time As was mentioned above, one of the key properties of a room's acoustical performance is the length of time it takes for the sound energy to die away. We need to add some more detail...
Read More >>
Soundproof a Room Stage 1 Part 5
Absorbency The acoustic absorbency of a material determines the proportion of energy removed from a sound wave when it reflects off that material. Absorbency values are almost always quoted as a...
Read More >>
Soundproof a Room Stage 1  Part 4Soundproof a Room Stage 1 Part 4
So we're done then? NO! You've only solved one problem! Sound proofing your room will keep everyone outside the room happy, because you have stopped sound escaping and therefore annoying everyone....
Read More >>
logo footer   Designed by Marshallarts (c)1999-2010 - All Rights Reserved